EAST Hpk High Temperature High Pressure Barrel Double Casing Horizontal Centrifugal Multistage Steam Boiler Feed Hot Water Circulation Supply Pump

DP Self - Balancing Multi - stage Centrifugal Pump (Boiler Feed Pump)

Boiler Feed Pump Structure Diagram

• The rotor is composed of components such as the first - stage impeller, impellers, throttle bushings, back - impellers, and shaft sleeves mounted on the shaft. The bearing adopts a "one - end fixed, one - end floating" grease - lubricated structure. A cylindrical roller bearing is used at the driving end, and a pair of angular contact ball bearings is used at the non - driving end to bear the residual axial force. The pair of angular contact ball bearings are installed face - to - face.
• Sealing between the suction section, middle sections, and discharge section of the pump is achieved by sealant. Sealing rings, diffuser sealing rings, etc. are installed between the rotor and the fixed parts for sealing. When the sealing rings are worn to the extent that they affect the pump's performance, they should be replaced in a timely manner.
• There are two types of shaft seals: packing seals and mechanical seals.
• This series of pumps is directly driven by a prime mover through an elastic coupling. When viewed from the prime mover side, the pump rotates in a clockwise direction.

Applications

• Water supply for boiler systems
• Cooling water systems
• Multiple pumps in parallel for high - rise building water supply
• Circulation and boosting of hot and cold clean water in high - pressure operating systems
• Conveyance of various flushing fluids

Features

• This pump has a vertical, multi - stage, sectional structure, which is compact and occupies a small area.
• The shaft seal is a wear - resistant mechanical seal, and a detachable type is available. It has minimal leakage, stable and reliable operation, and is convenient and quick to maintain.
• The pump body has a pipeline - type structure. Its inlet and outlet diameters are the same and are on the same straight line. It can be installed at any position on the pipeline like a valve, which is convenient, fast, and stable.
• The unique installation structure greatly reduces the floor space of the pump, and more than 40% of the capital construction investment can be saved.